Highly sensitive and selective detect of p‐arsanilic acid with a new water‐stable europium metal–organic framework

The p‐arsanilic acid (p‐ASA), as an aromatic organoarsenic compounds, had received considerable concerns for their potential toxicity and carcinogenic properties. It was essential to detect p‐ASA with a facile method. In this paper, an europium based fluorescent metal–organic framework (MOF) [Eu₂(clhex)·2H₂O)]·H₂O ( BUC‐69 ) was successfully prepared under hydrothermal conditions with 1,2,3,4,5,6‐cyclohexanehexacarboxylic acid (H₆clhex) as organic linker. BUC‐69 displayed superior fluorescence capability to achieve selective and sensitive detection toward p‐ASA in water, which presented the first example of a MOF‐based sensor to detect p‐ASA. BUC‐69 showed excellent chemical stability in solutions under pH ranging from 4 to 12, which makes it be a potential sensor both in acidity and alkalinity condition. Significantly, BUC‐69 performed well in fluorescent sensing of p‐ASA at a low concentration (10^?6 M) in the simulated wastewater prepared with real lake water, and the results were comparable to the values detected by Inductively Coupled Plasma Optical Emission Spectrometer (ICP‐OES). The corresponding mechanism of fluorescent sensing toward p‐ASA with BUC‐69 was proposed and affirmed.     

Rational Construction of an Exceptionally Stable MOF Catalyst with Metal-Adeninate Vertices toward CO2 Cycloaddition under Mild and Cocatalyst-Free Conditions

CO₂ is considered as the primary greenhouse gas, resulting in a series of serious environmental problems that affect people's life and health. Carbon capture and sequestration has been implemented as one of the most appealing pathways to control and use CO₂. Here, we rationally integrate various functional sites within the confined nanospace of a microporous metal–organic framework (MOF) material, which is constructed by mixed-ligand strategy based on metal-adeninate vertices. It not only exhibits excellent stability but also can efficiently transform CO₂ and epoxides to cyclic carbonates under mild and cocatalyst-free conditions. Additionally, this catalyst shows extraordinary recyclability for the CO₂ cycloaddition reaction.     

Concise Construction of the ACDE Ring System of Calyciphylline A Type Alkaloids by a [5+2] Cycloaddition

A concise route for construction of the ACDE ring skeleton in calyciphylline A type alkaloids was developed using an intramolecular [5+2] cycloaddition reaction of an oxidopyrylium species bearing a tetrasubstituted olefin. Key to the success of this reaction was the combination of acid and base, which accelerated the construction of this skeleton containing a spiro ring and vicinal quaternary carbon centers. The resultant tricyclic ADE ring compound was converted to an ACDE ring model through C−H oxidation and an aza-Wittig reaction.     

Solid-State NMR Spectroscopy: A Powerful Technique to Directly Study Small Gas Molecules Adsorbed in Metal–Organic Frameworks

Metal–organic frameworks (MOFs) have shown great potential in gas separation and storage, and the design of MOFs for these purposes is an on-going field of research. Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a valuable technique for characterizing these functional materials. It can provide a wide range of structural and motional insights that are complementary to and/or difficult to access with alternative methods. In this Concept article, the recent advances made in SSNMR investigations of small gas molecules (i.e., carbon dioxide, carbon monoxide, hydrogen gas and light hydrocarbons) adsorbed in MOFs are discussed. These studies demonstrate the breadth of information that can be obtained by SSNMR spectroscopy, such as the number and location of guest adsorption sites, host–guest binding strengths and guest mobility. The knowledge acquired from these experiments yields a powerful tool for progress in MOF development.     

Peculiar Photoinduced Electron Transfer in Porphyrin–Fullerene Akamptisomers

Porphyrin–fullerene dyads are promising candidates for organic photovoltaic devices. The electron-transfer (ET) properties of the molecular devices depend significantly on the mutual position of the donor and acceptor. Recently, a new type of molecular isomerism (akamptisomerism) has been discovered. In the present study, we explore how photoinduced ET can be modulated by passing from one akamptisomer to another. To this aim, four akamptisomers of the quinoxalinoporphyrin–[60]fullerene complex are selected for computational study. The most striking finding is that, depending on the isomer, the porphyrin unit in the dyad can act as either electron donor or electron acceptor. Thus, the stereoisomeric diversity allows one to change the direction of ET between the porphyrin and fullerene moieties. To understand the effect of akamptisomerism on the photoinduced ET processes, a detailed analysis of initial and final states involved in the ET is performed. The computed rate for charge separation is estimated to be in the region of 1–10 ns⁻¹. The formation of a long-living quinoxalinoporphyrin anion radical species is predicted.     

Bridging the Green Gap: Metal–Organic Framework Heteromultilayers Assembled from Porphyrinic Linkers Identified by Using Computational Screening

In organic photovoltaics, porphyrins (PPs) are among the most promising compounds owing to their large absorption cross-section, wide spectral range, and stability. Nevertheless, a precise adjustment of absorption band positions to reach a full coverage of the so-called green gap has not been achieved yet. We demonstrate that a tuning of the PP Q- and Soret bands can be carried out by using a computational approach for which substitution patterns are optimized in silico. The most promising candidate structures were then synthesized. The experimental UV/Vis data for the solvated compounds were in excellent agreement with the theoretical predictions. By attaching further functionalities, which allow the use of PP chromophores as linkers for the assembly of metal-organic frameworks (MOFs), we were able to exploit packing effects resulting in pronounced redshifts, which allowed further optimization of the photophysical properties of PP assemblies. Finally, we use a layer-by-layer method to assemble the PP linkers into surface-mounted MOFs (SURMOFs), thus obtaining high optical quality, homogeneous and crystalline multilayer films. Experimental results are in full accord with the calculations, demonstrating the huge potential of computational screening methods in tailoring MOF and SURMOF photophysical properties.     

Aminomethyl Transfer (Mannich) Reactions Between an O-Triethylsilylated Hemiaminal and Anilines,RnC6H5−nNH2 Leading to New Diamines,Triamines, Imines,or 1,3,5-Triazines Dependent upon Substituent R

The reactions of the Mannich reagent Et₃SiOCH₂NMe₂ ( 1 ) with a variety of anilines (mono-substituted RC₆H₄NH₂, R=H, 4-CN, 4-NO₂, 4-Ph, 4-Me, 4-MeO, 4-Me₂N; di-substituted R₂C₆H₃NH₂, R₂=3,5-(CH₃)₂, 3,5-(CF₃)₂; tri-substituted R₃C₆H₂NH₂, R₃=3,5-Me₂-4-Br and a “super bulky” aniline (Ar*NH₂) [Ar*=2,6-bis(diphenylmethyl)-4-tert-butylphenyl]) led to the formation of a range of products dependent upon the substituent. With electron-withdrawing substituents, previously unknown diamines, RC₆H₄NH(CH₂NMe₂) [R=CN ( 2 a ), NO₂ ( 2 b )] and R₂C₆H₃NH(CH₂NMe₂) [R₂=3,5-(CF₃)₂ ( 2 c) ] were formed. Further reaction of 2 a , b , c with 1 yielded the corresponding triamines RC₆H₄N(CH₂NMe₂)₂ (R=CN ( 3 a ), NO₂ ( 3 b ) and R₂C₆H₃N(CH₂NMe₂)₂, R₂=3,5-(CF₃)₂ ( 3 c ). The new polyamines were characterized by NMR spectroscopy, and for 2 a , 2 c _, and 3 c , by single crystal XRD. In the case of electron-donating groups, R=4-OMe, 4-NMe₂, 4-Me, 3,5-Me₂, 3,5-Me₂-4-Br, and for R=4-Ph, the reactions with 1 immediately led to the formation of the related 1,3,5-triazines, R=4-MeO ( 5 a ), 4-Me₂N ( 5 b ), 4-Me ( 5 c ), 3,5-Me₂ ( 5 d ), 3,5-Me₂-4-Br ( 5 e ), 4-Ph ( 5 f ), 4-Cl ( 5 g ). The “super bulky” aniline rapidly produced a single product, namely the corresponding imine Ar*N=CH₂ ( 4 ) which was also characterized by single crystal XRD. Imine 4 is both thermally and oxidatively stable. All reactions are very fast, thus based upon the presence of Si we are tempted to denote the reactions of 1 as examples of “Silick” chemistry.     

Synthesis and Structure Determination of SCM-15: A 3D Large Pore Zeolite with Interconnected Straight 12×12×10-Ring Channels

A new germanosilicate zeolite named SCM-15 (Sinopec Composite Material No. 15), the first zeolite containing a 3-dimensional (3D) channel system with interconnected 12-, 12-, and 10-ring channels (pore sizes: 6.1×7.2, 6.1×7.4, and 5.2×5.9 Å), has been synthesized using neutral 4-pyrrolidinopyridine as organic structure-directing agents (OSDAs). Its structure has been determined by combining single-crystal electron diffraction (SCED) and synchrotron powder X-ray diffraction (SPXD) data. The unique open framework structure of SCM-15 is related to that of FOS-5 ( BEC ), ITQ-7 ( ISV ), PKU-16 ( POS ), ITQ-26 ( IWS ), ITQ-21, Beta polymorph B, and SU-78B, since all these framework structures can be constructed from similar chains which are connected through shared 4-ring or double 4-ring (d4r) units. Based on this relation, six topologically reasonable 3D large or extra-large pore hypothetical zeolites are predicted.     

Imide-Functionalized Polymer Semiconductors

Imide-functionalized π-conjugated polymer semiconductors have received a great deal of interest owing to their unique physicochemical properties and optoelectronic characteristics, including excellent solubility, highly planar backbones, widely tunable band gaps and energy levels of frontier molecular orbitals, and good film morphology. The organic electronics community has witnessed rapid expansion of the materials library and remarkable improvement in device performance recently. This review summarizes the development of imide-functionalized polymer semiconductors as well as their device performance in organic thin-film transistors and polymer solar cells, mainly achieved in the past three years. The materials mainly cover naphthalene diimide, perylene diimide, and bithiophene imide, and other imide-based polymer semiconductors are also discussed. The perspective offers our insights for developing new imide-functionalized building blocks and polymer semiconductors with optimized optoelectronic properties. We hope that this review will generate more research interest in the community to realize further improved device performance by developing new imide-functionalized polymer semiconductors.